Change Location 
  1. Tuotevalikoima
  2. Tuotevalikoima
  3. Suurkuvatulostimiin
  4. Toimittajat
  5. DTF - Direct-to-film
  6. VersaStudio BY-20
[Translate to Suomi:] [Translate to Sverige:] Roland VersaOBJECT MO-240

Roland VersaSTUDIO BY-20

Leverantörer Roland   Eco-SolventUVLEDResinSublimeringDTF - Direkt-till-filCutters

Yleiskatsaus

[Translate to Suomi:] [Translate to Sverige:] VersaSTUDIO BY-20 Roland DG DTF

Roland VersaStudio BY-20 on huippuluokan Direct-to-Film (DTF) -tulostin, joka tuottaa poikkeuksellisia tuloksia ja on suunniteltu hoitamaan monenlaisia tulostustehtäviä tarkasti ja tehokkaasti, joten se sopii erinomaisesti sekä pieniin yrityksiin että suurempiin tuotantoympäristöihin. Edistyksellisen tekniikan ja käyttäjäystävällisen käyttöliittymän ansiosta BY-20 takaa korkealaatuiset tulosteet joka kerta. 

Esite

Marabu är en certifierad partner till Roland DG och säljer VersaSTUDIO BY-20. Teckna ett serviceavtal i samband med ditt köp för att säkerställa att din maskin presterar som bäst alltid.

Huoltosopimus

         

        Tekniset tiedot

        VersaSTUDIO BY-20

         BY-20
        Printing MethodPiezo ink-jet method
        MediaWidth5.91 to 20.2 in. (150 to 515 mm)
        ThicknessMaximum 39.3 mil (1.0 mm) with liner, for printing
        Maximum 15.7 mil (0.4 mm) with liner and 8.6 mil (0.22 mm) without liner, for cutting
        Roll outer diameterMaximum 5.9 in. (150 mm)
        Roll weightMaximum 13.2 lb. (6 kg)
        Core diameter3 in. (76.2 mm) or 2 in. (50.8 mm)
        Printing/cutting width (*1)Maximum 18.89 in. (480 mm)
        InkType220-ml cartridge
        ColorsCyan, Magenta, Yellow, Black, White
        Printing resolution (dots per inch)Maximum 1,440 dpi
        Cutting speed0.39 to 5.9 in/s (10 to 150 mm/s)
        Blade force (*2)30 to 500 gf
        BladeTypeRoland CAMM-1 series blade
        Offset0.000 to 1.500 mm (0.0 to 59 mil)
        Software resolution (when cutting)0.025 mm/step (0.98 mil/step)
        Media heating system (*3)Print heater set temperature:86 to 95 °F (30 to 35 °C)
        Dryer set temperature:86 to 100.4 °F (30 to 38 °C)
        ConnectivityEthernet (100BASE-TX/1000BASE-T, automatic switching)
        Power-saving functionAutomatic sleep feature
        Rated input100-240 Va.c. 50/60 Hz 2.1 A
        Power consumptionDuring operationApprox. 185 W
        Sleep modeApprox. 27W
        Acoustic noise levelDuring operation62 dB (A) or less
        During standby60 dB (A) or less
        Dimensions (Width x Depth x Height)42.1 in. × 24.3 in. × 24.5 in. (1,069 mm × 617 mm × 622 mm)
        Weight137 lb. (62 kg)
        EnvironmentDuring operation (*4)Temperature: 68 to 89.6 °F (20 to 32 °C)
        Humidity: 40 to 80 % RH (no condensation)
        Not operatingTemperature: 41 to 104 °F (5 to 40 °C)
        Humidity: 20 to 80 % RH (no condensation)
        Included itemsDedicated stands, power cord, Media take-up unit, media holders, replacement blade for separating knife, User's Manual, Software (FlexiDESIGNER VersaSTUDIO Edition, VersaWorks, Roland DG Connect), etc.
        *1The length of printing or cutting is subject to the limitations of the program.
        *2
        • 500 gf is the maximum instantaneous blade force.
        • The blade force must be adjusted according to details such as the media thickness.
        *3Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
        Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
        *4Operating environment (Use in an operating environment within this range.)
         Humidity vs Temperature